looking for intake suggestions on 454 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gflo383 · 12-22-2006, 07:05 PM

I posted in the other thread i started that i bought a 454. Well its from a 95 chev TBI, im ditching the TBI as suggested by many, and going with a carb.

I need an intake and carb, and i am not planning on makeing this a race engine by any means, but i would like to get as much as possible out of the midrange as i can with out cracking this engine open.

i was thinking of just getting an edelbrock carb/intake, like a 750 and a dual plain intake. anyone with experience with these parts or anyone have recomendations?

EDIT: also, after searching, i found the engine produces somewhere around 290HP and 410TQ stock.

12-22-2006, 07:05 PM	#1
gflo383 Registered User Join Date: Dec 2006 Location: Minnesota Posts: 130	looking for intake suggestions on 454 I posted in the other thread i started that i bought a 454. Well its from a 95 chev TBI, im ditching the TBI as suggested by many, and going with a carb. I need an intake and carb, and i am not planning on makeing this a race engine by any means, but i would like to get as much as possible out of the midrange as i can with out cracking this engine open. i was thinking of just getting an edelbrock carb/intake, like a 750 and a dual plain intake. anyone with experience with these parts or anyone have recomendations? EDIT: also, after searching, i found the engine produces somewhere around 290HP and 410TQ stock. __________________ 1986 IROC-Z lS1/T56 Moser 9" 78mm Turbo 1968 C10 step side, 5.3 Maggnacharger TVS1900 6L80E 2009 CCSB 5.3/6L80 4x4 http://members.cardomain.com/gflo383 Last edited by gflo383; 12-22-2006 at 07:06 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.