Shocks and shock relocating??!!

[fishmunger]

Ok, the c-notch is in, the shock relocators are in (all CPP) and I noticed that the shocks dont sit flush in the shock relocators...it looks like I'll have to shim the shocks inward a little on each side, probably about 3/4" with washers...just curious if anyone else has had this issue?

Also, I think my current shocks will bottom out about 1/2" before my axle bottoms out in the notch, do you think its worth it to invest in shorter shocks (these are still good otherwise), and if so, what brand and how many inches shorter?

thanks,

Nate