|
11-16-2002, 03:17 PM
|
#1 |
|
RHCP afficianado
Join Date: Oct 2002
Location: McLoud, OK
Posts: 789
|
check out this engine
I found this engine on http://www.golensengineservice.com/ its only $2999.99 and makes 400 HP. what do you think of this one?
Specs: Crankshaft Eagle Nodule-Iron crank Connecting Rods Eagle Forged 5140 I-Beam rods Pistons Keith Black HyperEutectic pistons Rings Speed Pro Plasma-Moly Rings Block Thermally cleaned and Stainless-Steel Shot. Inspected by MPI process. Bored, honed and pressure washed. Clevite cam bearings and pioneer brass freeze plugs installed. Cam Comp Cams - Operating Range 2000 - 6000 RPM - Idle Quality Good - Duration Intake 230° @ .050" Exhaust 230° @ .050" - Lift Intake 0.48" Exhaust 0.48" - Lobe Seperation 110° Heads GM Factory - Type Iron - Combustion Chamber 70 CC - Intake Runner 150 CC - Intake Valves SBI Steel 1.94" - Exhaust Valves SBI Steel 1.50" - Head Gasket Fel-Pro - Compression Ratio 9.5:1 Rocker Arms Factory Stamped Steel Pushrods Comp Cams
__________________
~Ryan~ 89 S-10 Blazer with a 4.3L 96 Ford Crown Vic P71 4.6L V8. This car rocks.  Here are some links to some good music. Jack Johnson Donavon Frankenreiter |
|
|
| Bookmarks |
|
|
Threaded Mode