250 power steering progress. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 02-14-2007, 11:33 PM

I am moving at a slower pace then I want. So far I have Installed an internal regulated alternator, and the power steering brackets, and pump. I am running into a pulley allingmet problem. My pump is a duble pulley type as is my water pump pulley and alternator. I can not get the p/s pulley to line up .
If I use the inner grove on it it is off by about 1/4-1/2 " on the outer one it is almost off 3/4".
I guess I have to try another Pulley , I have 3 and all are the same, maybe a singel one will do it,

02-14-2007, 11:33 PM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	250 power steering progress. I am moving at a slower pace then I want. So far I have Installed an internal regulated alternator, and the power steering brackets, and pump. I am running into a pulley allingmet problem. My pump is a duble pulley type as is my water pump pulley and alternator. I can not get the p/s pulley to line up . If I use the inner grove on it it is off by about 1/4-1/2 " on the outer one it is almost off 3/4". I guess I have to try another Pulley , I have 3 and all are the same, maybe a singel one will do it, Last edited by slepysal; 02-15-2007 at 11:20 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.