1967 Firewall hole identification - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe67 · 03-27-2007, 01:02 PM

I am preparing to have the metal work done to my cab (finally).

I am going smooth. I have already purchased the 3 pieces to block off the heater openings. I assume the smaller holes around those can be welded up as well.

I'm looking for some ID on the remaining holes across the firewall so I know what can go and what needs to stay.

I will run a factory steering column setup with an automatic transmission. Probably mounted on the steering column. I will run a vintage AC setup.

Thanks Guys

03-27-2007, 01:02 PM	#1
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	1967 Firewall hole identification I am preparing to have the metal work done to my cab (finally). I am going smooth. I have already purchased the 3 pieces to block off the heater openings. I assume the smaller holes around those can be welded up as well. I'm looking for some ID on the remaining holes across the firewall so I know what can go and what needs to stay. I will run a factory steering column setup with an automatic transmission. Probably mounted on the steering column. I will run a vintage AC setup. Thanks Guys __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.