The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > Welcome Area

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-11-2007, 03:01 PM   #1
Imperial Kustom
100% gearhead
 
Imperial Kustom's Avatar
 
Join Date: Apr 2007
Location: Boise, Idaho
Posts: 313
Another Newbie FNG!!

Hey guys, My name is Cameron and I just wand to say hi from Boise Idaho! There are some BAD trucks here! This one is mine. I will show some new pics later. I did all the work myself. Currently it has full air ride of my own design set up on nitrogen at 200 psi. The front is a 63-87 crossmember with 2" drop lower and Chrome-Moly Chevelle upper A-arms and 63 brakes. The rear uses stock trailing arms with a seven inch notch and a telescoping wishbone to locate everything. It all works so good. The body is channelled three inches and filled, shaved and rounded front to back. It runs a hopped up 283 with a five speed. I've had this truck for five years and I am only 23. Nothing was bought, Except the bags and A-arms, I built it all.
Attached Images
     
Imperial Kustom is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com