My Disc Install

[VDOG]

Originally Posted by jlaird

VDOG, can you say again what year inner tie rods you used. In the one of the brake FAQ's someone said the following:

"The sleeve your talking about from CCP allows you you to use 73-87 spindle in 67-72 trucks( Ball joint's must be 73-87) Is this what you did?

Yes the sleeve from CPP uses 73 outer tie rods and our 69 inner tie rod. Unless you convert the whole thing to 73, tie rods and pitman arms. I also used 73 spindles, ball joints U&L. The brake hoses from a 73 are close to 20 inches, so I used the ones from a 71-72 C10, there the same length as our drum brake hose lines.