Position of transmission yoke / ankle of rear axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Matshark · 10-10-2007, 05:57 PM

Hi Folks, I just got my rear axle and am going to install it.
ThereforI could need some advice, because the engine and transmission are not mounted yet.
I have a 4link for the rear axle which alows some ajstment for the
pinion ankle, but I would like to weld the brackets in an almost perfect position,
so that I do not have to adjust to much. I have a 97 LT1 and a 4L60E.
Here is my question:
Where would the transmission yoke be in this configuration, so that I can weld my brackets having the axle pinion aim in that direction.

Thanks
Matthias

10-10-2007, 05:57 PM	#1
Matshark Registered User Join Date: Mar 2007 Location: Heilbronn/Germany Posts: 54	Position of transmission yoke / ankle of rear axle Hi Folks, I just got my rear axle and am going to install it. ThereforI could need some advice, because the engine and transmission are not mounted yet. I have a 4link for the rear axle which alows some ajstment for the pinion ankle, but I would like to weld the brackets in an almost perfect position, so that I do not have to adjust to much. I have a 97 LT1 and a 4L60E. Here is my question: Where would the transmission yoke be in this configuration, so that I can weld my brackets having the axle pinion aim in that direction. Thanks Matthias __________________ 1955 2nd series 3100 Pickup, MustangII IFS, Ford 9" with 4 link, 4 wheel wilwood disc brakes, 383 Callaway supernatural, 4L60E 'All people dream, but not equally. Those who dream by night in the dusty recesses of their mind wake in the day to find that it was vanity. But the dreamers of the day are dangerous people, for they may act their dream with open eyes to make it possible.'



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.