350 TBI to Carb Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87Lowrider · 10-30-2007, 08:46 PM

I getting ready to drop the big block into the lowrider this winter so I'm gonna take the 350 in there now and put it into the 78 Camaro I'm building for my daughter. I want to change the motor to carbureted instead of TBI before I put it in the Camaro.

Someone told me to beware when changing the intake on the '87 350 because the angle of the mounting bolt of the heads were different than from older heads... is this true?

If so, I'd rather not rebuild the whole top end with different heads if I can find an intake that will bolt up and support a carb.

Thoughts?

Kenny

10-30-2007, 08:46 PM	#1
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,356	350 TBI to Carb Swap I getting ready to drop the big block into the lowrider this winter so I'm gonna take the 350 in there now and put it into the 78 Camaro I'm building for my daughter. I want to change the motor to carbureted instead of TBI before I put it in the Camaro. Someone told me to beware when changing the intake on the '87 350 because the angle of the mounting bolt of the heads were different than from older heads... is this true? If so, I'd rather not rebuild the whole top end with different heads if I can find an intake that will bolt up and support a carb. Thoughts? Kenny __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside - SOLD 2005 Chevrolet Tahoe Z71



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.