|
11-20-2007, 04:50 PM
|
#34 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: 58 3100 cab rebuild
Using the template I scribed the new parts on a 14Ga shhet of cold rolled mild steel. Netsx is cutting them out. I used a plasma torch so I could get nice clean cuts. Next is drilling the holes and drilling the reliefs for the bends.
Pic 1 is the blank roughed out pic 2 is the plasma cut pic 3 is the drilled bolt hole and bend reliefs pic 4 is cutting the front bend reliefs on the band saw pic 5 is a finished blank ready for the bending. Last edited by dwcsr; 11-20-2007 at 08:48 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode