March Truck Madness

[lowrollin70gmc]

Well, I've decided that I'm not quite low enough for my taste, and my current (now former) system leaked. So it's time for round 2, this time doing a little more work than last time. It will include laying frame and all that jazz.

So far plans are a watts link for the rear, a new trailer hitch (with removable center section), KP Components notch, moving the stock trailing arms, 8 new valves, hydraulic hose, and that's just the rear! For the front I'm doing a 2" crossmember chop, relocating the steering box and linkage up 2" and both assemblies forward 1-1.5", putting a cup into the LCA, and possibly adjusting ball joint angle.

All this in a week. Can it be done? Maybe, we'll have to see, but here's one day's worth of work (just me, no assistance other than a radio).


-

-

-

-

-

-
Where did all my rubber go? Oh, that's what the white smoke was.
-

-
-
Wish me luck, i'll need it. It's NDSU's spring break, so I'll try and update this often, but I want to spend most of my time in the garage (obviously).Any hints/suggestions/opinions gladly accepted, as constructive criticism makes a better end product.