My attempt at door repair

[arkracing]

Thanks for the kind words guys. I'm no expert, and actually that door skin that I pictured is the first welding I've done across a door or large outer body panel. I was nervous (I've done rockers and cab corners, but nothing like welding across a door) Just a couple of tips that I picked up and helped me get that acomplished. It is more time consuming than it is difficult.

There are alot of guys more talented than me on this board - who probably could give you some better tips & advice. Kevin "LFD" is one of them.

I'm going to be installing a cab corner on an S10 this afternoon hopefully. If I remember I'll try and take some pictures of the welding so you can see the "flat pea" (of couse that is if all goes well, I might have some ugly grapes too )