Need some help with a cardboard gas tank cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chipflyer · 04-23-2008, 04:05 AM

HELP! I have my seats and console out and I want to add the cardboard gas tank cover, I didn't have one to start with so I can't look at the old one. How is it supposed to go around the vent hoses on the passenger side of the tank, does it need to be cut? I thought there was only one cover for all 6 years, could there be a different one for 71-72?
Also do the tabs along the top get folder over around the back side of the tank and what holds the bottem in place?
Do you use adhesive to hold the whole thing in place?

A picture would be worth a thousand words

Thank you,

Jeff

04-23-2008, 04:05 AM	#1
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Need some help with a cardboard gas tank cover HELP! I have my seats and console out and I want to add the cardboard gas tank cover, I didn't have one to start with so I can't look at the old one. How is it supposed to go around the vent hoses on the passenger side of the tank, does it need to be cut? I thought there was only one cover for all 6 years, could there be a different one for 71-72? Also do the tabs along the top get folder over around the back side of the tank and what holds the bottem in place? Do you use adhesive to hold the whole thing in place? A picture would be worth a thousand words Thank you, Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.