|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
04-23-2008, 08:31 PM
|
#1 |
|
Registered User
Join Date: Oct 2006
Location: Oakridge Oregon
Posts: 1,864
|
Inline 6 250 starter ?
Any of you guys ever need to shim a 250 starter for starter gear / flywheel clearance?
Over the weekend, With new engine installed, New flywheel, New starter it made a real NASTY sound while turning over. I crawled under and took a look, the stater gear was stuck in the extend postion and unable to retract until I loosed a few of the mounting bolts slightly. So I took out my die grinder and cleaned up the mounting holes and the pilot snub that sticks into the Bellhousing just a little now it spins over smooth and quiet and retracts as it should........ Any of you guys ever have to do this to any 6 bangers?
__________________
68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 04-23-2008 at 08:41 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode