Pics of the rust bucket

[blackedoutharley]

I actually gave the old girl a bath today and took some photos. I have owned this '65 for nearly 20 years and it will be starting its 4th (maybe its the 5th??)incarnation soon.
Currently has a 385 inch small block with the original SM420 trans. Stock 12 bolt with 3.42 gears and an Auburn posi with Moser axles. In the time I have owned it there have been 3 small blocks including the current one, a big block (undrivable!), 3 rearends with two of them being rebuilt after one stupid move or another (LOL). 3 sets of wheels, countless tires (thank god I am in the biz ), and god knows how much primer. At one time it had 4 corner comet flash strobes in it and a self contained 200 gallon fire skid in the bed. (when used as a raceway fire/rescue truck) Recently installed a complete Painless Harness. Current plans are to replace front fenders, grill support and radiator support, clean and paint engine compartment, re-ring and bearing with new cam/lifters & heads, oil pump, etc. Basically a rebuild without new pistons. Tilt wheel & P/S, pwr brakes, rebuild front end and go through the brakes. New clutch linkage with new clutch (anybody want to buy a very trick, one off multidisc clutch set up? slightly used btw LOL), complete bed wood including new strips (unless somebody has a better idea, I am open to suggestions) repair the rust in the lower doors and drivers floorboard (minor) and complete paint interior and exterior. Very curious about A/C for this truck (deluxe heating controls removed currently from dash) as well as what to paint the inside of my new fenders with (if anything at all).

On to the pictures:


Sway bars are cool!







I always welcome ideas or suggestions so let them fly!