Upper control arm disassembely - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nima · 08-16-2008, 10:50 AM

Hey guys:
This question is not truck related actaullay, although the truck ones should be the same, therefore moderators please feel free to move it to proper place. I just didn't know where else to post it. Anyways, it is about a Nova. How do you take upper control arms apart to change the bushings after you takr thrm off of the car? Do you have to press the bushing out first? You know I am talking about the middle section of the upper control arm which bolts into the subframe. I hope I explained it right.
Thanks in advance.

08-16-2008, 10:50 AM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	Upper control arm disassembely Hey guys: This question is not truck related actaullay, although the truck ones should be the same, therefore moderators please feel free to move it to proper place. I just didn't know where else to post it. Anyways, it is about a Nova. How do you take upper control arms apart to change the bushings after you takr thrm off of the car? Do you have to press the bushing out first? You know I am talking about the middle section of the upper control arm which bolts into the subframe. I hope I explained it right. Thanks in advance. __________________ 1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.