Anyone used ECE 3/4 to 1/2 ton drop spindles? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRodGMC68 · 12-09-2008, 02:13 AM

hey folks, I'm in the process of my winter project and along the way I decided to ditch the hacked up coil springs and pony up for a set of drop spindles and a new set of springs.

Have any of you used the ECE 3/4 - 1/2 drop spindles and gone to 1/2 ton brakes? If so, did you have any complications with them? and problems or complaints? I trust ECE more than most companies... but a little research never hurt anything!

Thanks a bunch!
Kurt

12-09-2008, 02:13 AM	#1
HotRodGMC68 Registered User Join Date: Aug 2005 Location: Albuquerque, New Mexico Posts: 32	Anyone used ECE 3/4 to 1/2 ton drop spindles? hey folks, I'm in the process of my winter project and along the way I decided to ditch the hacked up coil springs and pony up for a set of drop spindles and a new set of springs. Have any of you used the ECE 3/4 - 1/2 drop spindles and gone to 1/2 ton brakes? If so, did you have any complications with them? and problems or complaints? I trust ECE more than most companies... but a little research never hurt anything! Thanks a bunch! Kurt __________________ 384 Stroker Small Block- Best ET: 13.24@103



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.