Blazer hard top install question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Old Chevy Mech · 12-12-2008, 04:46 PM

Hi,

While working on the Princess's Jeep I found that they have a measurement they set the windshield at for the hardtop and softtops.

If anyone has a near perfect stock Blazer that they regularly remove the top on, could you pull a measurement for me?

Simply the measurement from some straight edge on the top of each corner to the back inside edge of the rear qtr panel.

I know that the Jeep Windshield is hinged, and ours is not, but I think that over the past 38 years it may have sagged a bit. I'd rather adjust it ahead of time then try to force it up with the top.

Thanks!

Frank

12-12-2008, 04:46 PM	#1
Old Chevy Mech Keepin it runnin! Join Date: Oct 2007 Location: Deep River, CT Posts: 1,036	Blazer hard top install question Hi, While working on the Princess's Jeep I found that they have a measurement they set the windshield at for the hardtop and softtops. If anyone has a near perfect stock Blazer that they regularly remove the top on, could you pull a measurement for me? Simply the measurement from some straight edge on the top of each corner to the back inside edge of the rear qtr panel. I know that the Jeep Windshield is hinged, and ours is not, but I think that over the past 38 years it may have sagged a bit. I'd rather adjust it ahead of time then try to force it up with the top. Thanks! Frank __________________ 1970 K-5 4X4 Blazer 1970 K-20 4X4 Long Bed "Liberty Means Responsibility, that is why most men dread it"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.