|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
12-21-2008, 11:56 PM
|
#1 |
|
Senior Member
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
started tearing the 327 down
i started tearing the 327 down and this is what i found a broken exhaust valve have no idea where the rest went( THINK IT IS WHAT IS FUSED TO THE PISTION). this was on the number 8 cylider. i've yet still to find a reason for the knocking sound mains and rod are tight no spun bearings so it was either piston slap or spun cam bearings seeing i haven;t removed the cam yet.
the motor is a 327 out of a 67 acorrding to the number on the block. plan go getting rid of the vent tube and going with a pvc system. i cleaned the piston to see if i t been bored but no numbers on top of piston. plus only pistons i can find for the 327 are flat tops no valve relieves which throws me off
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube Last edited by truckdude239; 12-21-2008 at 11:57 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode