drop spindles??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

malexander44 · 01-11-2009, 11:58 PM

If I was to put 2 1/2 drop spindles on my 63 C10 do I have to change over to disk brakes? I really don't have the cash to do that at this moment becasue I would have to switch to a brake booster and master cylinder as well. At least that is what I have gathered from reading different posts.

Am I correct?

Mark

P.S. I already have 3 inch springs on the front and 4 inch in the rear. I plan on running a 2 inch lowering block out back after I address the front.

01-11-2009, 11:58 PM	#1
malexander44 Registered User Join Date: Oct 2007 Location: Grapevine, TX Posts: 58	drop spindles??? If I was to put 2 1/2 drop spindles on my 63 C10 do I have to change over to disk brakes? I really don't have the cash to do that at this moment becasue I would have to switch to a brake booster and master cylinder as well. At least that is what I have gathered from reading different posts. Am I correct? Mark P.S. I already have 3 inch springs on the front and 4 inch in the rear. I plan on running a 2 inch lowering block out back after I address the front.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.