headlight relay install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 01-12-2009, 12:15 AM

I got a dual realy holder and relays a while back and installed them today. I followed the how too found in thr FAQ section. Verey easy upgrade.
I didnt want to cut the old harnnes so I used spade conecters and just pluged them in. (as per chifs tip ) I also used a 30 amp circuit breaker instead of a fuse.
I didnt post any pics becuse the faq has them. But I do recomend this easy diy upgrade. Before at idle,when I would put on the head lights the volt meeter would drop to 12volts, now it drops to just a hair under 14 volts !!
do the relay upgrade its cheep and easy.
dual master cylider upgrade is next on list

01-12-2009, 12:15 AM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	headlight relay install I got a dual realy holder and relays a while back and installed them today. I followed the how too found in thr FAQ section. Verey easy upgrade. I didnt want to cut the old harnnes so I used spade conecters and just pluged them in. (as per chifs tip ) I also used a 30 amp circuit breaker instead of a fuse. I didnt post any pics becuse the faq has them. But I do recomend this easy diy upgrade. Before at idle,when I would put on the head lights the volt meeter would drop to 12volts, now it drops to just a hair under 14 volts !! do the relay upgrade its cheep and easy. dual master cylider upgrade is next on list __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.