700r4 electronic to mech speedo conv. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rlm316 · 03-10-2009, 01:59 PM

I could use some guidance here. I have a 700r4 with the elecrtonic speedo and I want to convert to mechanical. When I removed the tailshaft housing, there is a ring gear and some type of metal spacer or guard for the front yoke from the drive shaft. My question is are these pieces pressed on or is there another method of removal, and can it be retro-fitted with the plastic ring gear. Any help would be greatly appreciated.

Thanks, Lane

03-10-2009, 01:59 PM	#1
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	700r4 electronic to mech speedo conv. I could use some guidance here. I have a 700r4 with the elecrtonic speedo and I want to convert to mechanical. When I removed the tailshaft housing, there is a ring gear and some type of metal spacer or guard for the front yoke from the drive shaft. My question is are these pieces pressed on or is there another method of removal, and can it be retro-fitted with the plastic ring gear. Any help would be greatly appreciated. Thanks, Lane



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.