drop dead - The 1947 - Present Chevrolet & GMC Truck Message Board Network

40oz. · 03-16-2003, 08:01 PM

i have cut the springs on my 70 panel almost to the stops, i know that dropped spindles will get the front even lower, but what do you do for the rear? im not above Z'ing the frame in the rear , or the front for that matter, im in the custom business. i would need to break out my old carpenter tools to do a channel job

im in the process of pie cutting the roof, so im not afraid. this seems like the best site for chevy trucks and panels. so i know you guys have the answers
thanks. whit

03-16-2003, 08:01 PM	#1
40oz. Registered User Join Date: Mar 2003 Location: alabama Posts: 32	drop dead i have cut the springs on my 70 panel almost to the stops, i know that dropped spindles will get the front even lower, but what do you do for the rear? im not above Z'ing the frame in the rear , or the front for that matter, im in the custom business. i would need to break out my old carpenter tools to do a channel job im in the process of pie cutting the roof, so im not afraid. this seems like the best site for chevy trucks and panels. so i know you guys have the answers thanks. whit __________________ calm like a bomb. Last edited by 40oz.; 03-16-2003 at 08:05 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.