measurements need - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mongo · 12-25-2001, 08:35 AM

ok I screwed up big time. I got a short bed frame and swaped everything over cut up the long bed frame and scraped it. What I for got to do was double check the measurements of the cab mounts and the core suport mounts. please if any one has a 66 that the can take measurements on please see the pic of what I need

1. from front end of frame to back of core support mount.

2 from back of core support mount to back the first cab mount.

3. from front of firts cab mount to back of rear cab mount.

thanks so much
Ken
aka Mongo

[This message has been edited by Mongo (edited 12-25-2001).]

12-25-2001, 08:35 AM	#1
Mongo YES_____NO Join Date: Jul 1999 Location: Somewhere in the vicinity of betelgeuse Posts: 7,351	measurements need ok I screwed up big time. I got a short bed frame and swaped everything over cut up the long bed frame and scraped it. What I for got to do was double check the measurements of the cab mounts and the core suport mounts. please if any one has a 66 that the can take measurements on please see the pic of what I need 1. from front end of frame to back of core support mount. 2 from back of core support mount to back the first cab mount. 3. from front of firts cab mount to back of rear cab mount. thanks so much Ken aka Mongo [This message has been edited by Mongo (edited 12-25-2001).] __________________ People many not remember what you said or what you did, but they will remember the way you made them feel. - unknown Cause, remember: no matter where you go... there you are. - Buckaroo Banzai 1984 Help support the board



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.