|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
04-27-2009, 11:03 PM
|
#1 |
|
Registered User
 
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
new clutch master retro fit
well I had some time this weekend to work on my truck. As you know the 60-62 m/t used a hydraulic clutch. This is a good system but the clutch master is part of the brake master cylinder, a single circuit system.
This is a problem if you want to install a dual master (either for drums or disc brakes) I know some members have had questions on what to do for the clutch if you want to add a booster . Some have used the CPP or MP brakes set up but they are about 500.00 for there set up I bought this kit from MP brakes a while back, but you could get the Wilwood master from summit and fab up your own bracket and push rod 3/4 master 3'' 5/16 bolt,nut wahsers and a spacer the push rod it needed to be modified
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 04-27-2009 at 11:03 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode