Rear Shock Relocator brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 05-13-2009, 02:13 PM

This is a new unused set of brackets for relocating the shocks for the rear on lowered coil sprung trucks. I am including a set of heavy-duty shock mount studs for the lower mounts. The brackets come drilled for the factory mount studs (1/2"), and these studs are 5/8", so you would need to drill the bracket hole out a bit to use these, or you could just re-use your factory mount studs. They did not come with the brackets originally, but I had them from another project and do not need them. Questions welcome, but first "I'll take it" gets it.

$60 check or m/o Shipped to the lower 48.

05-13-2009, 02:13 PM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,058	Rear Shock Relocator brackets This is a new unused set of brackets for relocating the shocks for the rear on lowered coil sprung trucks. I am including a set of heavy-duty shock mount studs for the lower mounts. The brackets come drilled for the factory mount studs (1/2"), and these studs are 5/8", so you would need to drill the bracket hole out a bit to use these, or you could just re-use your factory mount studs. They did not come with the brackets originally, but I had them from another project and do not need them. Questions welcome, but first "I'll take it" gets it. $60 check or m/o Shipped to the lower 48. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.