opinions on this 383 build?

[vegaschevy]

I have seen these guys with 454s, 396s, 350s.

What does everyone think of the price they are asking and the Hp claims and parts combination?
CHEVY 383 STROKER / 490 HORSEPOWER ALUMINUM HEADED COMPLETE CRATE MOTOR!!!
ALL NEW / PRO-BUILT!!!
2 YEAR / UNLIMITED MILE WARRANTY!!!



**** ONLY BRAND-NEW / PRO-BUILT SBC 383 STROKER / 490 HORSEPOWER COMPLETE CRATE MOTOR YOU'LL FIND FOR LESS THAN $3,700!!! ****

****** YOU'LL NEVER FIND THIS MUCH SBC CRATE MOTOR ANYWHERE ELSE THIS CHEAP!!! ******

******** ONE OF THE BEST LOOKING & RUNNING SMALL BLOCK CHEVY CRATE MOTORS YOU'LL EVER FIND!!! ********

************** 2 YEAR / UNLIMITED MILE WARRANTY ********************


BRAND NEW PROCOMP HP ALUMINUM CYLINDER HEADS!
ALL NEW/NEVER INSTALLED IN VEHICLE!
PRO-BUILT / MACHINED / ASSEMBLED IN A STATE-OF-THE-ART FACILITY............NO HOME-BUILT JUNK! !
SUPER BARGAIN ONLY $3,690! OUR REGULAR PRICE: $4,990!
COMES WITH RECEIPT!
HORSEPOWER: 490, TORQUE: 495 FT./LBS. (VERY STREETABLE / PUMP GAS!)
COMES WITH CARB, INTAKE, IGNITION, PAN, H. BAL., TIMING COVER, ETC. AS PICTURED, PLUS HP HEI DISTRIBUTOR, HP ALUMINUM W.PUMP, AND POLISHED ALUMINUM VALVE COVERS!
2 YEAR/UNLIMITED MILE WRITTEN WARRANTY!
NICE MUSCLECAR LOPE/IDLE!
DELIVERY / SHIPPING AVAILABLE!
CALL PERFORMANCE ENGINES: (623)388-9067
OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT



MACHINED, BALANCED & BLUEPRINTED, 3-ANGLE COMPETITION VALVE JOB ON CYLINDER HEADS, ASSEMBLED (ALL DONE BY PROFESSIONALS)

SUPER DEAL & MOST BANG FOR YOUR BUCK ON CRAIG'S LIST!

GREAT MUSCLECAR SOUND!

@PUMP GAS FRIENDLY COMPRESSION RATIO (10.5:1)@

GREAT CHOICE FOR STREET/STRIP RELIABLE HIGH PERFORMANCE CRATE ENGINE!

BALANCED TO WITHIN 2 GRAMS!

INCLUDES A 2 YEAR/UNLIMITED MILE WRITTEN WARRANTY!

Machined in a State-Of-The-Art Machine Shop, Plus Professionally & Meticulously Assembled Assuring You The Utmost In Quality & Reliability! Something Not Found In A Home-Builder/Hobbiest's Product!

BLOCK: CHEVROLET 350 4 BOLT MAIN

HEADS: PROCOMP HP ALUMINUM 190CC INTAKE RUNNER (ALL NEW PARTS: 2.02"I/1.60"E VALVES, SPRINGS, GUIDES, RETAINERS, ROCKER STUDS, GUIDEPLATES)

CRANKSHAFT: CHEVY 383 (EAGLE, BRAND NEW!)

MACHINE WORK:
Oven Baked & Magnifluxed (Completely Cleaned & Checked For Cracks)
Bored & Finished Computer Honed To Within .0002'' Straightness & Roundness
Align Honed Main Bearing Bores/Saddles
Square Decked
Re-Size Connecting Rods
3 Angle Competition Valve Job
Balanced & Blueprinted
PORTED CYLINDER HEADS
PROFESSIONALLY Assembled

ALL NEW PARTS:
Speed-Pro (Federal-Mogul) Hyperutectic Pistons
Hastings Moly Rings
Clevite CL-77 Rod/Main/Cam Bearings
Crane HP Hydraulic Flat-Tappet Cam (LIFT: .510"I/.533"E, DUR @ .050": 244I/254E, 112 LOBE SEPERATION) NASTY MUSLCECAR IDLE/LOPE YET STREETABLE!
SA Gear Double Roller HP Timing Set
HP Connecting Rod Bolts (180,000 p.s.i)
PROCOMP Aluminum HP Single-Plane Intake Manifold (Dual-Plane Available NO CHARGE)
Edelbrock 750 CFM Carb
PROCOMP ALUMINUM FULL ROLLER HP ROCKER ARMS (1:5 Ratio)
Fel-Pro Gasket Set
PROCOMP HP H.E.I. Distributor/Coil (50,000 Volts)
Melling HV Pump
Melling Oil Pump Pickup Screen
Melling Oil Pump Driveshaft
SSI/Specialty Products Oil Pan
Professional Products HP Harmonic Balancer
P.E.P. Cylinder Head Bolts
PROCOMP HP Valves (2.02" Intake/1.60" Exhaust)
Manley HP Pushrods
Pioneer Brass Freeze Plugs
Dipstick & Tube Holder
PROCOMP HP Aluminum Water Pump
PROCOMP HP Mechanical Fuel Pump
PROCOMP POLISHED ALUMINUM Valve Covers (Add $110 To Change To Trick FABRICATED Polished Aluminum Valve Covers)
Fasteners (Intake Manifold, Valve Covers, Oil Pan, Waterpump Bolts)

Horsepower: 490
Torque: 495
$3699