Finished P/S Switchover

[jbgroby]

I had another thread started but there were a few non-issues that was posted so I figured a start another.

The biggest issue was the fact that I had originally gotten the REZ P/S kit adaptor. This kit although good is made for the 63-66 Chevy or GMC frame. It was not made to conform with the early boxed Chevy/GMC frame the years 60-62.

Classic Preformance Products (CPP) makes one for those years exaclty and that is what I used for the modification. In the ablum you will see a 1963 factory P/s setup (from Arthur Throckmortons GMC Truck)

Also both the REZ adaptor and the CPP.

I start from scratch and total time spent was 1 hours and 25 mimutes. The only thing you will ned is a 5" 7/16 for the lower right bolt hole. I'm very impressed with the CPP Kit.

http://rides.webshots.com/album/571837084bSxNPf