ECE Disc brake conversion with drop spindles and cross drilled rotors

[VA72C10]

Yet another component I won't be using. Going with a more basic "shop" build now for the truck. Made to fit 67-70 1/2 ton chevy or GMC trucks and convert them from manual to disc brakes. http://www.earlyclassic.com/home.aspx
Part #903-6770-DBC6CD 999 plus shipping new

Comes Complete With 2 1/2" drop spindles, Master Cylinder, Proportioning Valve, Brake Lines, Brake Hoses, Calipers, Pads, Rotors (CROSS DRILLED!!!), Bearings, Seals, Dust Shields, Dust Caps, Castle Nuts, Slotted Washers, Banjo Bolts, and All necessary Hardware and Brackets.

Asking 800 FIRM Plus shipping. Everything is new in boxes. Save 200 off on new parts. I will accept paypal, but you MUST cover the fees. Shipping will be high due to weight...figure roughly 120-150 for shipping. I will deliver to VA/WV and surrounding states for a small fee.

No actual pictures as parts are in the boxes. Note that the rotors are cross drilled. I can take pictures of the rotors if needed as I have opened that box to look at them. Picture below is from ECE.