Boxing the frame in strategic places. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

s_nova69 · 01-04-2010, 07:04 PM

I installed my c-notch today on one side and have decided I would box in some areas that would do the best to strengthen and stiffen the chassis as I am wanting some decent canyon run ability w this. I came to the decision looking at the extra material I have from boxing the rear notches. It has front and rear sway bars and I have tubular control arms on the way now and lowered 3.5/5. So what places would you, or have you boxed your frame, for good strength?

01-04-2010, 07:04 PM	#1
s_nova69 Registered User Join Date: Jul 2007 Location: slc, ut Posts: 318	Boxing the frame in strategic places. I installed my c-notch today on one side and have decided I would box in some areas that would do the best to strengthen and stiffen the chassis as I am wanting some decent canyon run ability w this. I came to the decision looking at the extra material I have from boxing the rear notches. It has front and rear sway bars and I have tubular control arms on the way now and lowered 3.5/5. So what places would you, or have you boxed your frame, for good strength? Attached Images __________________ Phil '70 Longhorn 421 700r4 tach 4 wheel disc hydroboost daily driver '72 short super build 4wd '72 Suburban LT4 coming soon!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.