|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-08-2010, 08:40 PM
|
#1 |
|
Registered User
Join Date: Dec 2009
Location: bisbee, arizona
Posts: 1,530
|
factory alternator pully for 72 307
restoring my 1972 chevy c 10's engine compartment and I noticed that my lower alternator bracket has some bogus spacers between the bracket and the head. actually they were nuts installed between the bracket and the head so that the alternator pully lined up. clearly this is wrong. but looking at some pictures of other engin compartments I see similar "accomodations". either spacers between the bracket and the head or some sort of spacer rig between the bracket and the alternator.
I have an alternator that has a single groove pully that is almost 3/8 inch thicker than every other one I've seen. the thicker portion is between the pulley groove and the alternator fan. Pictures to follow. what everybody doing regarding this? my engine compartment is to remain origional anybody got pictures of thier al pulley? Last edited by mike16; 01-09-2010 at 01:02 AM. Reason: she's a 72 not a 73 duh! |
|
|
| Bookmarks |
|
|
Threaded Mode