New engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 01-14-2010, 01:25 AM

If your budget allows take a look at the L31 Vortec replacement long block. They are a very nice engine which comes with the factory roller cam. The roller cam is nice so you don't have to worry about which oil to run, or getting an additive for the oil with a flat tappet cam. If that one is out of reach then either the 330hp HO350, or the 290hp 350.

You will definitely want to switch to some lower gears(higher numerically) with a 700R4. The goal isn't to have the lowest possible cruise rpm's, but rather to have the engine operating in it's power band where it is most efficient.

01-14-2010, 01:25 AM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: New engine If your budget allows take a look at the L31 Vortec replacement long block. They are a very nice engine which comes with the factory roller cam. The roller cam is nice so you don't have to worry about which oil to run, or getting an additive for the oil with a flat tappet cam. If that one is out of reach then either the 330hp HO350, or the 290hp 350. You will definitely want to switch to some lower gears(higher numerically) with a 700R4. The goal isn't to have the lowest possible cruise rpm's, but rather to have the engine operating in it's power band where it is most efficient. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.