T221/sm465 swap from T221/3sp - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67gmcstepside · 02-05-2010, 10:16 AM

I have searched and found a lot of information around swaping in and out sm465's but most of the info had a 205 as the tc. Can I assume that a 465/221 combo will fit? I undersdtand the clutch changes, but as far as the TC back the existing drive shaftes and cross members should be reusable? I want to make sure I know what I am getting into. The 465 is already connected to the a 221 so the adapater most be correct. I hoping just to remove the 3sp and adapter and bolt in the 465 with its adapter. After rebuilding the 465 first
Thanks as always,
Don

02-05-2010, 10:16 AM	#1
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	T221/sm465 swap from T221/3sp I have searched and found a lot of information around swaping in and out sm465's but most of the info had a 205 as the tc. Can I assume that a 465/221 combo will fit? I undersdtand the clutch changes, but as far as the TC back the existing drive shaftes and cross members should be reusable? I want to make sure I know what I am getting into. The 465 is already connected to the a 221 so the adapater most be correct. I hoping just to remove the 3sp and adapter and bolt in the 465 with its adapter. After rebuilding the 465 first Thanks as always, Don Last edited by 67gmcstepside; 02-05-2010 at 01:07 PM. Reason: spelling



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.