1" crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 02-09-2010, 11:33 PM

will a 1" chopped crossmember done the Captkaos way have clearance issues with the steering...I'm wanting to drop my truck 6/8, but I don't want to run 3" springs up front...so I'm thinking I'm going to need to get the lower control arm mounts up out of the way, but I don't need 1.5" I only need 1"...so why push the limits...the truck won't be bagged and I want to chop the crossmember for the ground clearance...the extra 1" static drop is just added icing...thanks fellas for answering my little question...

Chuck.

02-09-2010, 11:33 PM	#1
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	1" crossmember will a 1" chopped crossmember done the Captkaos way have clearance issues with the steering...I'm wanting to drop my truck 6/8, but I don't want to run 3" springs up front...so I'm thinking I'm going to need to get the lower control arm mounts up out of the way, but I don't need 1.5" I only need 1"...so why push the limits...the truck won't be bagged and I want to chop the crossmember for the ground clearance...the extra 1" static drop is just added icing...thanks fellas for answering my little question... Chuck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.