|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
02-20-2010, 02:28 PM
|
#1 |
|
Registered User
Join Date: Feb 2010
Location: Airdrie, AB
Posts: 11
|
Trans / T-Case Combination Help
Hope you guys can give me some help with this...
I have a 1980 Step Side that currently has a T350/203 combo in it. I also have an SM465/205 sitting on the garage floor. There is a guy near me selling an SM465/208 and a T400/205. My goal is to put the SM465 with a 203/205 doubler behind it into the step side. Other than finding a factory SM465/203 adapter, I know where to find what's needed including the input and output shafts. Or do you guys think I'd be better off with the T400 and a 203/205 doubler? I'd need to have the face of the 203 drilled to fit the T400/205 adapter and an input shaft for the 203, or find a factory T400/203 adapter and input/output shafts for both. Thoughts?  Trucker
__________________
And now, a word from my lawyers... This post is the intellectual property of the person commenting under the pseudonym "GMC Trucker". These posts are for entertainment only. Copying or quoting in whole, or in part, is given free license for use by any member of this board for use on this board. Any use, in whole or in part, for reference outside this forum requires the express written consent of its author. |
|
|
| Bookmarks |
|
|
Threaded Mode