Exhaust on lowered 65 short fleet. Trans crossmember problems... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robby5323 · 03-02-2010, 09:36 AM

Down to running exhaust on the truck. I have lowered it enough that the exhaust tubing is going to have to run above the transmission crossmember. Anyone have any pics of this or use that setup on their truck...? Any other ways of routing the exhaust tubing...? I am shooting for just running the pipes straight back and dumping them at the rear. I am using headers and they hang just below the frame rails. I am lowered with cut springs in front (about 4.5" and jeep springs with 2" blocks in the rear).

03-02-2010, 09:36 AM	#1
robby5323 Registered User Join Date: Jun 2009 Location: Tyler, Texas Posts: 67	Exhaust on lowered 65 short fleet. Trans crossmember problems... Down to running exhaust on the truck. I have lowered it enough that the exhaust tubing is going to have to run above the transmission crossmember. Anyone have any pics of this or use that setup on their truck...? Any other ways of routing the exhaust tubing...? I am shooting for just running the pipes straight back and dumping them at the rear. I am using headers and they hang just below the frame rails. I am lowered with cut springs in front (about 4.5" and jeep springs with 2" blocks in the rear).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.