Old drivetrain 216 / 3-speed what to keep? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LEEVON** · 03-21-2010, 06:05 AM

The 216 engine and 3 speed on the column drivetrain was strewn about the cab and bed of my truck after an apparent disassembly some 20 years ago. I have no plans to resurrect it and limited room to store parts but I also don't want to throw away something valuable. Right now everything is going to scrap except for the trans, bellhousing, intake/carb, oil bath air cleaner, radiator and 2 coffee cans of nuts, bolts and odd small pieces.

The block, head, covers, clutch/flywheel/pressure plate, rear end, starter, generator, water pump, fan and pretty much anything else not listed above are doomed.

Thoughts?

03-21-2010, 06:05 AM	#1
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,897	Old drivetrain 216 / 3-speed what to keep? The 216 engine and 3 speed on the column drivetrain was strewn about the cab and bed of my truck after an apparent disassembly some 20 years ago. I have no plans to resurrect it and limited room to store parts but I also don't want to throw away something valuable. Right now everything is going to scrap except for the trans, bellhousing, intake/carb, oil bath air cleaner, radiator and 2 coffee cans of nuts, bolts and odd small pieces. The block, head, covers, clutch/flywheel/pressure plate, rear end, starter, generator, water pump, fan and pretty much anything else not listed above are doomed. Thoughts? __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.