Floor pan replacement question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jerden · 04-22-2010, 11:55 AM

I "think" I'm ready to tackle repairing the rust on the floor of my Blazer. From the looks of it the outer rockers and rocker boxes have already been done but the floor has holes everywhere. What floor pan piece or pieces do I get to replace the floor pan? I've contacted LMC and they said they only carry floor pans for trucks. What parts have you guys been using and where are you getting them?

Here is what I was looking at and basically all the other companies I saw carried the same part.

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=22

I was told the complete assembly and the repair panels are just for a truck.
HELP ME!!!

04-22-2010, 11:55 AM	#1
jerden Registered User Join Date: Jul 2008 Location: Houston TX Posts: 35	Floor pan replacement question I "think" I'm ready to tackle repairing the rust on the floor of my Blazer. From the looks of it the outer rockers and rocker boxes have already been done but the floor has holes everywhere. What floor pan piece or pieces do I get to replace the floor pan? I've contacted LMC and they said they only carry floor pans for trucks. What parts have you guys been using and where are you getting them? Here is what I was looking at and basically all the other companies I saw carried the same part. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=22 I was told the complete assembly and the repair panels are just for a truck. HELP ME!!! __________________ 72' Blazer, 350, sm465, 205, 14bolt, 44 front with 4.10s , Diy4x4 FGB52's, Rear shackle flip with 56's, Skyjacker 4" lift springs, ORD 1" body lift, 35x12.50 Bfg's on H2's Last edited by jerden; 04-22-2010 at 11:56 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.