Referencing: How to install a 73-87 swaybar into a 60-72 for cheap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ljackson · 05-02-2010, 09:39 AM

After reading the post below by TX FF, I have some questions. I am using an '81, 1/2 GMC parts truck for the front suspension and P/S on my 64 c 10. The brackets for the sway bar that attach to the frame with rivits are broken/bent on my parts truck. I see in the post where some have used the shorter brackets on lowered trucks or bolted the bar to the frame. Could I do this with a stock ride height truck? Would the angles be too severe and cause problems?

How to install a 73-87 swaybar into a 60-72 for cheap!
http://67-72chevytrucks.com/vboard/s...ad.php?t=72338

05-02-2010, 09:39 AM	#1
ljackson Registered User Join Date: Apr 2009 Location: Amarillo, Texas Posts: 636	Referencing: How to install a 73-87 swaybar into a 60-72 for cheap! After reading the post below by TX FF, I have some questions. I am using an '81, 1/2 GMC parts truck for the front suspension and P/S on my 64 c 10. The brackets for the sway bar that attach to the frame with rivits are broken/bent on my parts truck. I see in the post where some have used the shorter brackets on lowered trucks or bolted the bar to the frame. Could I do this with a stock ride height truck? Would the angles be too severe and cause problems? How to install a 73-87 swaybar into a 60-72 for cheap! http://67-72chevytrucks.com/vboard/s...ad.php?t=72338 __________________ Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.