|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
06-15-2010, 12:24 AM
|
#15 |
|
Registered User
Join Date: May 2010
Location: Oak Harbor, Wa.
Posts: 19
|
Re: Gear ratio identification
Put the rear axle on jackstands. Mark one of the tires on the inside and then mark one of the U-joint caps on the rear yoke. Then, turn the driveshaft by hand and count how many turns of the driveshaft equals one turn of the tire. 4 to 1 equals 4.10:1 or 4.11:1, 3 and 3/4 to 1 equals 3.73:1, 3 and 1/2 to 1 equals 3.55:1 and so on...
|
|
|
| Bookmarks |
|
|
Threaded Mode