NP 208 transfer question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mike reeh* · 05-27-2003, 02:17 AM

I'd be willing to put money on YES you can swap inputs..

why did they make two? Dunno.

But I did the exact same thing you're talking about with NP205 transfer case... I had a good on from a manual truck, and a broken one from a th350 truck, but the input shaft & gear was still good .. tore them both down and swapped what I needed. works like a charm and was well worth the effort..

I say go for it if you have the skill.. it aint hard.. its a good time to throw a gasket/seal kit in the case and clean all the crud out and change the oil too..

good luck-

mike

05-27-2003, 02:17 AM	#2
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 683	I'd be willing to put money on YES you can swap inputs.. why did they make two? Dunno. But I did the exact same thing you're talking about with NP205 transfer case... I had a good on from a manual truck, and a broken one from a th350 truck, but the input shaft & gear was still good .. tore them both down and swapped what I needed. works like a charm and was well worth the effort.. I say go for it if you have the skill.. it aint hard.. its a good time to throw a gasket/seal kit in the case and clean all the crud out and change the oil too.. good luck- mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.