Ok now what?

[Sillyoldman]

I'm posting this here opposed to the electrical section because this is a year specific post. And you all are better looking over here

I've been staring at the ugly mess of a steering column on the '63 for way too long. I anticipated a battle pulling off the steering wheel. I discovered that the nut required 2/3 of a turn to remove. I figured I would need a puller to get it off but gave it a yank first. Luck I didn't break my nose! It nearly fell off. The turn signal harness assembly appears to be "ok" although the lever and the cam is mostly gone. Where do I find a new switch & Harness? It appears that everyone sells a '64-66 one but I don't see a 60-63. Should I just buy a new cam and lever and chuck it back in? At this point my electrical starts the engine, turns on the headlights but that's all I get. I figured the column is a obvious starting point.