|
07-24-2010, 10:54 AM
|
#2 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: roller rockers
All depends on your spring pressure. They are known to pull out with heavier than stock spring pressue. Pinning is a good idea but if your going to rework the heads then I would have them machined for screw in studs. Pinning you can do yourself with a drill and the correct pins. But its reccomended that they be off the engine
|
|
|
| Bookmarks |
|
|
Threaded Mode