How about this setup? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 08-03-2010, 10:36 PM

ive decided to rework my suspension a little bit, to get a few inches lower. it probably wont be until fall or winter until i get around to doing it but i want to get the parts and thinking out of the way now lol

i would like to do a setup like this...except instead of using a bridge bar on top to mount the bags, i would like to weld a top plate on top of the frame, then still offset a circle plate on the trailing arm like the pic below. this way, the ta will hit the frame, and i can get another 3" lower (the size of the collapsed bag). would this work?

08-03-2010, 10:36 PM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,183	How about this setup? ive decided to rework my suspension a little bit, to get a few inches lower. it probably wont be until fall or winter until i get around to doing it but i want to get the parts and thinking out of the way now lol i would like to do a setup like this...except instead of using a bridge bar on top to mount the bags, i would like to weld a top plate on top of the frame, then still offset a circle plate on the trailing arm like the pic below. this way, the ta will hit the frame, and i can get another 3" lower (the size of the collapsed bag). would this work? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.