couple questions...

[joe231]

First, any A/C experts around here?
I'm having some issues with the A/C in my crew
I recently replaced the Condenser, Orifice tube, and accumulator.
Then within a couple weeks my compressor went out (I'm pretty sure it was due to me not adding enough oil), it quit building pressure on the high side.
So I replaced the compressor, pulled a deep vacuum and recharged it.
Throughout the whole process the A/C has been lack-luster at best. Now my pressures are right where they should be and the inlet to the evaporator is ice cold. My accumulator is sweating like crazy. I have tried adding and subtracting refrigerant. My vent temps are only slightly cool. I have checked the blend doors and all that is working correctly. Everything I have read online is pointing towards moisture in the system. How can I tell if my accumulator is bad (I realize it is cheap to replace, But I really hate throwing money at a problem with out condemning parts). I'm also wondering about the evaporator. I'm going to get a laser thermometer in a few minutes so maybe I can pin-point the problem.
I'm open to suggestions.....

second issue,
I need the little bushing that the spring holds against the frame side bracket on the stock auto transmission shift assembly. Mine is completely missing. So far i have been unsuccessful at finding any online. Any one know a source for these? Part number? How about a picture even? Maybe I can just make one....

Thanks!!