Reverse Light Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76/85 Truck · 08-19-2010, 01:43 AM

Hey all! I have a 76 Chevy with an 85 body, and I recently noticed in order to get my reverse lights to turn on, i have to put it in reverse, and move the shifter (I have a Turbo 350) upwards (towards park) and hold it there. At first I thought to adjust my neutral safety switch, but my truck will start in P,R,N,D,2, or 1. So I was wondering if adjusting it would help, if I need a new one, or if it is something else. Also, the safety switch is small, white, and has 2 wires going to it. Thanks for reading, and thanks for everybody's help!!!!

08-19-2010, 01:43 AM	#1
76/85 Truck Registered User Join Date: Jun 2010 Location: Libby, MT Posts: 163	Reverse Light Question Hey all! I have a 76 Chevy with an 85 body, and I recently noticed in order to get my reverse lights to turn on, i have to put it in reverse, and move the shifter (I have a Turbo 350) upwards (towards park) and hold it there. At first I thought to adjust my neutral safety switch, but my truck will start in P,R,N,D,2, or 1. So I was wondering if adjusting it would help, if I need a new one, or if it is something else. Also, the safety switch is small, white, and has 2 wires going to it. Thanks for reading, and thanks for everybody's help!!!! __________________ Rich My first truck!! 1976 Chevy 3/4 ton Camper Special and a 1985 GMC body. Has a 350, 4 BBL Edelbrock, with a Turbo 350, and NP205 T-case. Last edited by 76/85 Truck; 08-19-2010 at 02:04 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.