Bleeding brakes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

09-05-2010, 03:40 PM

GmtGmt

Conversion Truck Addicted

Join Date: Sep 2009

Location: Denmark, Europe

Posts: 1,552

Bleeding brakes

im trying to bench bleed my master cylinder but i cant seem to bleed the rear part of the master cylinder

Name: HPIM2728_637x480.JPG
Views: 184
Size: 67.2 KB

Name: HPIM2728_637x480.JPG
Views: 184
Size: 67.2 KB

it must be for the rear brakes but i cant get any brake fluid out where the brake line ataces even if i remove my plug and press the piston all the way in

the front one works and have been able to bleed it.

i dont know if the master cylinder is bad or not because it has been without brake fluid for like last 5 years or so it might have become bad.

is there are a way to open these steel one i have removed the snap ring but cant get the piston out

__________________
Thomas

Quote:

Tonight mine pulled a few cars out of snowbanks, and is sitting in my driveway, icicles on the grille, wheels just white cakes of snow, buried up to the lug nuts in powder, straps and chains wrapped around the bumpers, the outline of the wipers clear in 4 inches of snow on the windshield... A tired warrior of the 1980s in a world of low profile tires, front wheel drive, and plastic bumpers, where people stay in their houses until snowplows move the offending substance from their paths, too helpless to travel without AAA and chains and salt, clearing their windows with longhandled brushes while gently stepping around in the snow trying to stay nice and dry.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 12:30 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.