Assistance Needed

[Blake_H]

I have been searching the forum and have gotten close to answering some questions, but not close enough to be confident about doing what I'm planning on doing. So, here goes, and any help is very much appreciated.

I have a 1988 suburban that I bought for parts. Its in good shape, and I have already transplanted some easy parts off of it to my '87

In order of importance.

I would like to swap the cluster from the suburban to the truck. Will I need to repin the connector on the '87 in order for this to work?
Picture from the dash harness of the suburban:



I would like to swap the columns. The '87 doesn't have tilt, and the suburban does. However, the suburban was fully loaded and the '87 isn't. Will there be a bunch of wiring that I will have to repin? And if so, where can I find that info.

I would also like to swap the cruise from the suburban to the truck. Any pitfalls on this that I should be aware of? I have a pretty good idea on this one, but not having done this before, I thought I would ask.


Thanks for your help!