CO Carpet Flooring for manual trans 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DirtyLarry · 11-07-2010, 10:44 PM

This carpet flooring came from ACC several years ago and is in great shape. It is a little dirty in these pictures but will clean up easily, as there are no permanent stains. It has not been wet and does not stink. It also has the upgraded backing on the underside of the carpet mat. The edges had to be trimmed so the door sill plate would fit properly.

Will take $40 for it plus whatever the freight would be to get it to you. I paid $200 for it from ACC http://accmats.com/

The carpet was removed because I am swapping the SM465 for a NV4500 and the shift lever hole locations will be changing.

11-07-2010, 10:44 PM	#1
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Carpet Flooring for manual trans 4x4 This carpet flooring came from ACC several years ago and is in great shape. It is a little dirty in these pictures but will clean up easily, as there are no permanent stains. It has not been wet and does not stink. It also has the upgraded backing on the underside of the carpet mat. The edges had to be trimmed so the door sill plate would fit properly. Will take $40 for it plus whatever the freight would be to get it to you. I paid $200 for it from ACC http://accmats.com/ The carpet was removed because I am swapping the SM465 for a NV4500 and the shift lever hole locations will be changing. __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.