Rear ventilation from two to multiple speed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kikkegek · 11-17-2010, 08:22 AM

hello,

the switch for the rear ventilation in my ride is broken. I need to replace it. I checked to see if the wires are still working. and they are. I measure an amperage of 1A at LO and 10A at HI setting.

But LO is too low and HI is too high. HI feels like a storm inside the car. I am now looking for a solution or new switch to make it possible to select speeds in between or at least a middle speed, so I can vent the rear of the car "normally".

any ideas?

and where can I find the controller for these two speeds right now?

11-17-2010, 08:22 AM	#1
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Rear ventilation from two to multiple speed hello, the switch for the rear ventilation in my ride is broken. I need to replace it. I checked to see if the wires are still working. and they are. I measure an amperage of 1A at LO and 10A at HI setting. But LO is too low and HI is too high. HI feels like a storm inside the car. I am now looking for a solution or new switch to make it possible to select speeds in between or at least a middle speed, so I can vent the rear of the car "normally". any ideas? and where can I find the controller for these two speeds right now? __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.